Double Inlet Centrifugal Fan

Stainless steel centrifugal fan

Features: corrosion resistance. High strength. High air volume. High energy efficiency. Easy to install and durable.

Stainless steel centrifugal fan impeller disk all made of 304 stainless steel, fixed with stainless steel rivets, the disk is equipped with disassembly devices. Easy to disassemble and overhaul.

Stainless steel centrifugal fan is equipped with shaft sealing device to protect the bearings and shaft from the erosion of acid and alkali gases, prolonging the service life of the fan and reducing the frequency of failure. The fan motor and bearing can be imported or domestic brand according to the customer's needs.

The outside of the fan can be equipped with an access port and drainage hole according to customer needs, which is convenient for impeller inspection and cleaning to avoid accumulation of scale on the impeller. Generally no instructions are not equipped.

Classification: Qingdao De Hongli machinery all fan equipment all use the order system production, according to the customer's use of demand, customized for you, so that you buy the heart with confidence.

Product Description

Features: corrosion resistance. High strength. Large air volume. High energy efficiency. Easy to install and durable.

-Stainless steel centrifugal fan impeller disk is made of 304 stainless steel, fixed with stainless steel rivets, and equipped with disassembly devices on the disk. Easy to disassemble and overhaul.

-Stainless steel centrifugal fan is equipped with shaft sealing device to protect the bearing and shaft from the erosion of acid and alkali gas, prolonging the service life of the fan and reducing the frequency of failure. The fan motor and bearing can be imported or domestic brand according to the customer's needs.

-The exterior of the fan can be equipped with access ports and drainage holes according to customer needs to facilitate impeller inspection and cleaning and avoid impeller scale accumulation. Generally no instructions are not equipped.

Classification: - All the centrifugal fans are produced by order system, according to the customer's needs, customized for you, so that you can buy the satisfactory use of the peace of mind. The fan is divided into two types of left and right rotation, from the motor (pulley) side of the front view, the impeller rotates clockwise for right rotation, counterclockwise rotation for left rotation. type A for the click direct drive. type B, C, E for the belt drive, D, F for the coupling drive.

Stainless steel fan inspection and replacement of work matters

Stainless steel fans need to frequently check the bearing lubricating oil supply, if the box appears to leak oil, you can tighten the end cover bolts a little or replace with new seal packing. Bearing lubricating oil in normal use, should be replaced at least once in half a year, the first use, about 200 hours after the operation, the oil tank needs to be completely cleaned and cleaned after the old oil can be filled with new oil.

If you want to replace the fan bearings, stainless steel fan manufacturers should pay attention to the following matters: Before putting the new bearings in, the bearings and bearing boxes must be very clean. The bearings will be placed in the temperature of about 70 ~ 80 ℃ oil heating and then installed on the shaft, not forced assembly to avoid injury to the shaft.        

Hot Tags: double inlet centrifugal fan, China, suppliers, manufacturers, factory, customized, wholesale, low price, for sale, made in China,