Anti Corrosion Centrifugal Fan

The use of the overall structure, the bottom of the installation of casters, handle, to achieve the effect of mobile, can be in the grain warehouse ventilation exhaust port at will docking, easy to use.

Send Inquiry

Product Introduction

Centrifugal anti-corrosion fan

When the centrifugal anti-corrosion fan works, the motor (motor) drives the impeller to rotate in the volute casing, and the air is sucked from the center of the impeller through the suction port. Due to the dynamic action of the blade on the gas, the gas pressure and speed can be increased, and under the action of centrifugal force, the gas is thrown along the blade path to the casing and discharged from the exhaust port.

Centrifugal anti-corrosion fan is mainly composed of impeller and casing. The impeller of small fan is directly installed on the motor. Medium and large centrifugal anti-corrosion fans are connected with the motor through coupling or pulley. Centrifugal anti-corrosion fan is generally single-sided air inlet and uses single-stage impeller; Large flow can be intake on both sides, with two back-to-back impellers, also known as double suction centrifugal anti-corrosion fan.

First, Performance characteristics of fans for grain storage

Second, the grain warehouse fan installation precautions

Before installation: all parts of the fan should be thoroughly checked, whether the parts are firmly connected, and whether the transmission parts are flexible.

Installation: fan inlet and outlet pipe connection should be adjusted to make a natural fit, no forced connection, if necessary, can use soft connection.

After installation

1) Should be manually coiled, check whether the fan is running flexible, there is no collision phenomenon, before test operation.

(2)In order to prevent motor overload burn, the fan must be started in the case of no load, such as the situation is good gradually increase the load.

centrifugal industrial extractor fan (1)(001)